Posted by hans2 on Mar 12, 2016; 12:15am
URL: https://itus.accessinnov.com/Bridge-mode-Internet-OK-but-no-Admin-access-tp371p407.html

I've found my setup guide for bridge mode from the other forum:

---
Here's my bridge mode setup guide:

Prepare your own LAN / configure router:
1) LAN IP address: make sure it is not within the 192.168.1.110-120 range
2) DHCP IP pool range: make sure it is not overlapping the 192.168.1.110-120 range
3) DHCP Gateway: put here your router IP address
4) DHCP DNS server: 192.168.1.111 - this is the Shield ETH1 address.
5) DHCP DNS server - enable "Advertise router's IP in addition to user-specified DNS" to ensure web filtering works.

Now connect Shield into the LAN following the admin guides (link)
a) Shield ETH0 to the cable modem
b) Shield ETH2 to the router WAN port
c) Shield ETH1 to the router LAN port
d) Turn on Shield - wait 10 minutes for first time
e) Turn on Cable modem
f) Turn on Router

internet should be working now
Shield should be reachable on https://192.168.1.111/ or https://shield.lan

6) Logon to Shield using u/p admin/itus
7) Go to System > Administration and Change password
8) Go to Network > Interface and take note of the MAC address of BR-LAN


Thee router may assign another IP address to Shield.

To prevent this go back to the router web interface:
9) DHCP set static IP address for the BR-LAN MAC address to 192.168.1.111
---