Re: Suricata on the Shield
Posted by
Roadrunnere42 on
Jan 06, 2021; 11:45am
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Shield-v2-tp2014p2174.html
Cant wait to try the shield with snort3 when you release it.
Andy
On Wed, 6 Jan 2021 at 10:27, Grommish [via Itus Networks Owners Forum] <
[hidden email]> wrote:
You could fix that 😂. Actually, I'm at the point I've got Rust lang working, Suricata and Snort3 working, I'm about finished I think.
On Wed, Jan 6, 2021, 5:22 AM Turrican [via Itus Networks Owners Forum] <
[hidden email]> wrote:
Sounds like the issue I was getting on my shields for a while, if I recall we though it was a thermal issue, not sure if it was or not though. l have stopped
using them now and to be honest The fw is a mess on both devices so can really help to test
From: Grommish [via Itus Networks Owners Forum] <[hidden email]>
Sent: Wednesday, January 6, 2021 10:19:58 AM
To: Turrican <[hidden email]>
Subject: Re: Suricata on the Shield
Wonder if it's a hardware issue on my device then? No idea. Thanks for checking!
On Wed, Jan 6, 2021, 4:08 AM Roadrunnere42 [via Itus Networks Owners Forum] <
[hidden email]> wrote:
I did the test as asked and all connected ok
cable in Eth0 cable in Eth2 NO cable in Eth1 booted ok and obtained ip addresses through DHCP
cable in Eth0 cable in Eth2 cable in Eth1 booted ok and obtained ip addresses through DHCP
Reboot by unplugging power and ip address obtained ok through DHCP
Im using
Firmware Version OpenWrt SNAPSHOT r13960-ff8cdd5395 / LuCI Master git-20.206.32620-95d004f
hope this helps
On Tue, 5 Jan 2021 at 20:47, Roadrunnere42 [via Itus Networks Owners Forum] <
[hidden email]> wrote:
Hi
Will Try tomorrow when the house is empty.
On Tue, 5 Jan 2021 at 18:28, Grommish [via Itus Networks Owners Forum] <
[hidden email]> wrote:
Interesting development and I'm not sure how/where to attribute this (I'm still testing).
I was having issues loading an image and the system would not pickup a DHCP address on eth0. We've seen this issue in the past and were never able to track it down. After blowing the Shield up to the point I am having to TFTP a rescue image, I noticed I have
any issues with the network port IN THE FIRMWARE.. Eh, this is new?
I've tracked it down to the following: If the Shield is booted with a cable plugged into Eth1, the ports will never work. If you unplug the Eth1 cable (Eth0/Eth2 seem fine) it boots fine. It's either a CABLE issue or a FIRMWARE issue. I'm testing the cable
as soon as I can, but I wonder if anyone wants to try and confirm this on their device? Simply put, cold-boot with a cable not plugged into Eth1, make sure it works.. Plug eth1 in, reboot.. If this works as a bug, eth0 will NOT have an IP address. If so,
unplug, reboot and see if the IP on eth0 comes back up.
Just as a FYI if you get issues with picking up a DHCP address, try that :)
Running Itus Shield v2 Firmware
Running Itus Shield v2 Firmware
Running v2 Firmware
Running Itus Shield v2 Firmware