Re: v2 continuing development
Posted by
Roadrunnere42 on
Jul 22, 2020; 6:48pm
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Shield-v2-tp2014p2124.html
Well i've added the recovery image in gateway all ok
formatted to f2fs all ok
installed bridge and router to 4.19. all ok
on the bridge switch I ran the system upgrade file, now boots into version 5.4 then freezes, so I want to reload the kernel bin file, but am unsure which one to use now I have f2fs
Also when I upgrade the router mode 4.19 to the latest 5.4 which file do I use as i'm getting confused with the different emails I have.
On Tue, 21 Jul 2020 at 00:26, Grommish [via Itus Networks Owners Forum] <
[hidden email]> wrote:
Nope, was not aware, but I am now :)
I'll look at that. My primary goal is to get the device introduced as an official device for OpenWrt, so we can let the people maintaining the big servers deal with building things out :)
I am also learning about HOW their build system works.. For example, the issue you want into with banip and the kernel "version". The code didn't change, I didn't do an upstream merge or anything, i simply removed a package (or tried to) and rebuilt.. the result? Kernel mismatch on only certain things.
FYI, doing a sysupgrade with the bridge sysupgrade file will fix your issue, but you'll have to reinstall and setup adblock.. You can see what I'm looking for help wise here. it's the only thing holding this up.. I cannot get /dev/mmcblk1pX to mount r/w so I can move the sysupgrade.tgz file there (so it'll be applied on the next boot)..
Running Itus Shield v2 Firmware