Login  Register

Re: Itus Firmware v2

Posted by Roadrunnere42 on Apr 19, 2020; 8:56am
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1969.html

My serial number is different, i remember that each Shield had a different serial number and you had to register that number for updates.

My Shield yesterday played up and i did a reset flashed the image again but now it will not give a ip address on eth 1 or 2.
It boots into old router mode ok but on gateway running v2 no ip, on serial port can log into v2 bit no ip address given out. 

On Sun, 19 Apr 2020, 07:23 Grommish [via Itus Networks Owners Forum], <[hidden email]> wrote:
So..  I broke the source..  I broke networking somehow, badly.  Then, i ended up doing a hard-reset on the repo in frustration (git reset --hard is the devil).  So, I lost all the work since April 9th.

However..  I took the opportunity to fix some things from the way i did.   i created some new patch files in an effort to track down the networking issue.  It is STILL broken, btw, However, it's now broken under Kernel 5.4.31

I'm still working on getting things to work. I literally just got it booted (my poor mmc block is crying from the flashing)..  But, I like the fact it's running a new kernel.

root@OpenWrt:/# uname -a
Linux OpenWrt 5.4.31 #0 SMP Sat Apr 18 16:54:19 2020 mips64 GNU/Linux
root@OpenWrt:/# cat /proc/cpuinfo
system type             : ITUS_SHIELD (CN7020p1.2-1000-AAP)
machine                 : Unknown
processor               : 0
cpu model               : Cavium Octeon III V0.2
BogoMIPS                : 2000.00
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 256
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 2, address/irw mask: [0x0ffc, 0x0ffb]
isa                     : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented        : vz
Options implemented     : tlb rixiex 4kex octeon_cache 32fpr prefetch mcheck ejtag llsc guestctl0ext guestctl2 rixi lpa vtag_icache userlocal perf_cntr_intr_bit ebase_wg badinstr badinstrp perf
shadow register sets    : 1
kscratch registers      : 4
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

processor               : 1
cpu model               : Cavium Octeon III V0.2
BogoMIPS                : 2000.00
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 256
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 2, address/irw mask: [0x0ffc, 0x0ffb]
isa                     : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2
ASEs implemented        : vz
Options implemented     : tlb rixiex 4kex octeon_cache 32fpr prefetch mcheck ejtag llsc guestctl0ext guestctl2 rixi lpa vtag_icache userlocal perf_cntr_intr_bit ebase_wg badinstr badinstrp perf
shadow register sets    : 1
kscratch registers      : 4
package                 : 0
core                    : 1
VCED exceptions         : not available
VCEI exceptions         : not available

root@OpenWrt:/#
Running Itus Shield v2 Firmware



If you reply to this email, your message will be added to the discussion below:
http://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1968.html
To start a new topic under Technical Discussion, email [hidden email]
To unsubscribe from Itus Networks Owners Forum, click here.
NAML