Re: Itus Firmware v2
Posted by
Grommish on
Apr 17, 2020; 5:22pm
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1957.html
Try this, from the Shield and booted into the new image.
mount /dev/mmcblk1p1 /overlay
touch /overlay/ItusgatewayImage
unmount /overlay
reboot
On Fri, Apr 17, 2020, 10:58 AM Turrican [via Itus Networks Owners Forum] <
[hidden email]> wrote:
Ok, hooked up my LAN to Eth0 and it is not getting any IP, tried several reboots and waited etc:
root@OpenWrt:/# ifconfig
br-lan Link encap:Ethernet HWaddr 2C:26:5F:80:09:41
inet addr:10.10.10.10 Bcast:10.10.10.255 Mask:255.255.255.0
inet6 addr: fe80::2e26:5fff:fe80:941/64 Scope:Link
inet6 addr: fd18:640:804c::1/60 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:2068 (2.0 KiB)
eth0 Link encap:Ethernet HWaddr 2C:26:5F:80:09:40
inet6 addr: fe80::2e26:5fff:fe80:940/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:144 errors:0 dropped:4 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22046 (21.5 KiB) TX bytes:8529 (8.3 KiB)
I moved the switch to R and rebooted just to test (left the cables are they were) and it got an IP straight away, and I could get to the admin page in my browser:
root@Shield:/# ifconfig
---snip---
eth0 Link encap:Ethernet HWaddr 2C:26:5F:80:09:40
inet addr:192.168.1.113 Bcast:192.168.1.255 Mask:255.255.255.0
any suggestions? I might try reloading the image and see if that helps.
Cheers
Looking forward to running v2
To unsubscribe from [FIRMWARE] Itus Networks Shield Firmware Upgrade *WIP*,
click here.
NAML
Running Itus Shield v2 Firmware