Posted by Turrican on Apr 17, 2020; 2:57pm
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1956.html

Ok, hooked up my LAN to Eth0 and it is not getting any IP, tried several reboots and waited etc:

root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr 2C:26:5F:80:09:41
          inet addr:10.10.10.10  Bcast:10.10.10.255  Mask:255.255.255.0
          inet6 addr: fe80::2e26:5fff:fe80:941/64 Scope:Link
          inet6 addr: fd18:640:804c::1/60 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:2068 (2.0 KiB)

eth0      Link encap:Ethernet  HWaddr 2C:26:5F:80:09:40
          inet6 addr: fe80::2e26:5fff:fe80:940/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:144 errors:0 dropped:4 overruns:0 frame:0
          TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:22046 (21.5 KiB)  TX bytes:8529 (8.3 KiB)

I moved the switch to R and rebooted just to test (left the cables are they were) and it got an IP straight away, and I could get to the admin page in my browser:



root@Shield:/# ifconfig
---snip---

eth0      Link encap:Ethernet  HWaddr 2C:26:5F:80:09:40
          inet addr:192.168.1.113  Bcast:192.168.1.255  Mask:255.255.255.0
         

any suggestions? it looks like it's getting an IPv6 address but not an IPv4?? I've reloaded the image and same results.  Thanks