Itus Networks Owners Forum - Re: Itus Firmware v2

Itus Networks Owners Forum › Technical Discussion

Re: Itus Firmware v2

Posted by Roadrunnere42 on Apr 16, 2020; 3:06pm
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1951.html

I downloaded v2

but found that if eth0 is not connect to a network then eth2 will not give an ip, have not tried eth0

On Thu, 16 Apr 2020, 15:33 Turrican [via Itus Networks Owners Forum], <[hidden email]> wrote:

Thanks for the updated commands, went on ok and upon reboot I get the orange status light. Can't get an IP though.

Before updated my setup was to connect directly to the Shield (Eth1 to Laptops Ethernet port), this got me an IP in the 10. range when switch was in pos 'r'. After the update with the switch in pos 'g' I dont get any ip from eth1, am I meant to? Like I said this box is not connected to my network yet, just seeing if I can get it going.

Thanks!
Looking forward to running v2

If you reply to this email, your message will be added to the discussion below:
http://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1950.html

To start a new topic under Technical Discussion, email [hidden email]
To unsubscribe from Itus Networks Owners Forum, click here.
NAML