Posted by 1TUS on Feb 02, 2020; 8:05pm
URL: https://itus.accessinnov.com/Help-with-my-Itus-Shield-tp1920p1923.html

Thanks for the reply. I actually got it to work. I noticed that it would connect to the internet when I used it in router mode so I knew it was not completely broken. I am using it in bridge mode. When I went in to the Network/Interfaces/WAN/Physical Settings page, I noticed that the bridge interfaces was not checked off so I checked it off and added interfaces eth0, eth1, and eth2. After this it started working fine.

I have noticed that since then I have not seen any threats show up in my IPS logs. I usually see one or two per day. Maybe it's too early to tell. I hope I set this correctly. Any advice would be appreciated. I'm still on firmware 1.51 SP1 btw. Thanks.