Does the image have any gui, i can ssh ok and it connect to the internet fine, internal ip is 10.10.10.10, when i point the web browser there nothing loads.

Am I missing something as I though openwrt had a gui? 

On Thu, 15 Aug 2019 at 06:00, Grommish [via Itus Networks Owners Forum] <[hidden email]> wrote:

Here is the link to the image:  ItusgatewayImage

Yes, you've got the correct instructions.

1) From the Shield: mount /dev/mmcblk0p1 /overlay
Yes, when using an ITUS image, you have to use /dev/mmcblk0pX - Under the new image, its /dev/mmcblk1pX
2) Copy the file (ItusgatewayImage) to /overlay
You can copy it however you want.. scp, ftp, etc
3) umount /overlay
4) Place switch in Gateway Mode
5) Reboot

If you have it available, I highly recommend using the console cable just to keep an eye on things - That being said, when the "M" LED on the front turns Orange, it's booted.

If you have issues with connectivity:
1) mount /dev/mmcblk1p1 /overlay
2) touch /overlay/ItusgatewayImage
3) umount /overlay
4) reboot


You've got my email if you need it!

Running Itus Shield v2 Firmware

---

If you reply to this email, your message will be added to the discussion below:

http://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1829.html

To start a new topic under Technical Discussion, email [hidden email]
To unsubscribe from Itus Networks Owners Forum, click here.
NAML

---

If you reply to this email, your message will be added to the discussion below:

http://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1830.html

To unsubscribe from [FIRMWARE] Itus Networks Shield Firmware Upgrade *WIP*, click here.
NAML