Login  Register

Re: [FIRMWARE] Itus Networks Shield Firmware Upgrade *WIP*

Posted by Roadrunnere42 on Aug 15, 2019; 5:26pm
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1830.html

Does the image have any gui, i can ssh ok and it connect to the internet fine, internal ip is 10.10.10.10, when i point the web browser there nothing loads.
Am I missing something as I though openwrt had a gui? 

On Thu, 15 Aug 2019 at 06:00, Grommish [via Itus Networks Owners Forum] <[hidden email]> wrote:
Here is the link to the image:  ItusgatewayImage

Yes, you've got the correct instructions.

1) From the Shield: mount /dev/mmcblk0p1 /overlay
Yes, when using an ITUS image, you have to use /dev/mmcblk0pX - Under the new image, its /dev/mmcblk1pX
2) Copy the file (ItusgatewayImage) to /overlay
You can copy it however you want.. scp, ftp, etc
3) umount /overlay
4) Place switch in Gateway Mode
5) Reboot

If you have it available, I highly recommend using the console cable just to keep an eye on things - That being said, when the "M" LED on the front turns Orange, it's booted.

If you have issues with connectivity:
1) mount /dev/mmcblk1p1 /overlay
2) touch /overlay/ItusgatewayImage
3) umount /overlay
4) reboot


You've got my email if you need it!
Running Itus Shield v2 Firmware



If you reply to this email, your message will be added to the discussion below:
http://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1829.html
To start a new topic under Technical Discussion, email [hidden email]
To unsubscribe from Itus Networks Owners Forum, click here.
NAML