Login  Register

Re: [FIRMWARE] Itus Networks Shield Firmware Upgrade *WIP*

Posted by Gnomad on Jul 02, 2019; 7:22am
URL: https://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1794.html

My mistake, yes, was thinking of the SD slot.
Sounds good.

On Tue, 2 Jul 2019 at 15:17, Grommish [via Itus Networks Owners Forum] <[hidden email]> wrote:
Every Shield has a embedded Flash card.. It's what the MMC (Multi-Media Card) in /dev/mmcblk0 means :D

It's an embedded Flash card, basically..  I wasn't referring to the front-panel SD card slot.

I'm not sure if stock luCi has the cron page, but I can certainly pull it if it doesn't.  i did notice that the cron service was disabled by default, I had to enable and start it. I'll need to figure out how to make sure it's started by default in the image.

The front-panel SD slot *should* work out of the box if anyone ever wanted to use it, but I've never bothered to check.  The drivers are there for it though.

Gnomad wrote
Sounds reasonable!  The original shield luci had a page showing all the
custom crons - is that something you've pulled over?
If so, people can always tweak the timing to their own requirements
anyway.

Note that (from memory) not all shield models have the MMC slot, and for
other users an MMC card might not be inserted - so you'll want an
availability detection check upfront regardless.



If you reply to this email, your message will be added to the discussion below:
http://itus.accessinnov.com/FIRMWARE-Itus-Networks-Shield-Firmware-Upgrade-WIP-tp1726p1793.html
To unsubscribe from [FIRMWARE] Itus Networks Shield Firmware Upgrade *WIP*, click here.
NAML
OpenWrt SNAPSHOT, r10391-3d8d528939