Posted by Roadrunnere42 on Nov 28, 2016; 7:04pm
URL: https://itus.accessinnov.com/Upgrade-to-1-51SP1-tp10p1328.html

Hi LTleg

can you remember the firmware version that the shield was running (RC1 or SP 1.51)

As you say your network is basic try this
switch the shield to router mode
connect your router to the shield eth0
connect the cable from computer into eth2
do a factory reset (unplug power, place pin in reset hold, whist keeping pin pressed in reconnect power also keep pressing in the pin for a further 30 seconds, then let go then leave for 10 minutes whist it starts up.

in web browser type 10.10.10.10

now do you get the log in screen with password.

Roadrunnere42