Port Forwarding 08-11-2015, 12:49 PM (08-11-2015, 10:13 AM)Marco Wrote: I suspect the issue you're having is that the Shield is already listening on 443 for with WebUI management. You should use a different port such as 444. No need to create an additional traffic rules--just a single port forward rule will be enough. You will need to restart the FW service after creating the rule for the traffic to pass: ADVANCED > System > Startup > Firewall > Restart That did it. I changed from TCP 443 to TCP 444 and it worked. I now have a triple port forward straight to my server and I can get to it from the Internet. Thanks! Network, Firewall, Port Forwards: Name: 444 Forward Protocol: TCP External Zone: wan External Port: 444 Internal Zone: lan Internal IP Address: 10.10.10.9 Internal Port: 444 Add, Save & Apply Results: Match IPv4-TCP From any host in wan Via any router IP at port 444 Forward to: IP 10.10.10.9, port 444 in lan System, startup, firewall, restart