Octeon cust_private_rhino_itus7x(ram)# help
?           - alias for 'help'
askenv      - get environment variables from stdin
base        - print or set address offset
base64      - print or set address offset
bdinfo      - print Board Info structure
bootelf     - Boot from an ELF image in memory
bootm       - boot application image from memory
bootoct     - Boot from an Octeon Executive ELF image in memory
bootoctelf  - Boot a generic ELF image in memory. NOTE: This command does not
              support simple executive applications, use bootoct for those.
bootoctlinux- Boot from a linux ELF image in memory
bootp       - boot image via network using BOOTP/TFTP protocol
bootvx      - Boot vxWorks from an ELF image
bunzip      - uncompress a bzip2 compressed memory region
cdp         - Perform CDP network configuration
cmp         - memory compare
cmp64       - memory compare
coninfo     - print console devices and information
cp          - memory copy
cp64        - memory copy
crc32       - checksum calculation
date        - get/set/reset date & time
dhcp        - boot image via network using DHCP/TFTP protocol
dns         - lookup the IP of a hostname
echo        - echo args to console
editenv     - edit environment variable
eeprom      - EEPROM sub-system
env         - environment handling commands
ext2load    - load binary file from a Ext2 filesystem
ext2ls      - list files in a directory (default /)
ext4load    - load binary file from a Ext4 filesystem
ext4ls      - list files in a directory (default /)
fatinfo     - print information about filesystem
fatload     - load binary file from a dos filesystem
fatls       - list files in a directory (default /)
fatwrite    - write file into a dos filesystem
fdt         - flattened device tree utility commands
flush_dcache- Flushes and invalidates the data cache
flush_l2c   - Flushes the L2 cache
freeprint   - Print list of free bootmem blocks
go          - start application at address 'addr'
gpio        - input/set/clear/toggle gpio pins
grepenv     - search environment variables
help        - print command description/usage
i2c         - I2C sub-system
imxtract    - extract a part of a multi-image
inv_icache  - Invalidates the instruction cache
itest       - return true/false on integer compare
loadb       - load binary file over serial line (kermit mode)
loads       - load S-Record file over serial line
loady       - load binary file over serial line (ymodem mode)
loop        - infinite loop on address range
loop64      - infinite loop on address range
md          - memory display
md5sum      - compute MD5 message digest
md64        - memory display
mdio        - MDIO utility commands
meminfo     - display memory information
mii         - MII utility commands
mm          - memory modify (auto-incrementing address)
mm64        - memory modify (auto-incrementing address)
mmc         - MMC sub system
mmcinfo     - display MMC info
mw          - memory write (fill)
mw64        - memory write (fill)
namedalloc  - Allocate a named bootmem block
namedfree   - Free a named bootmem block
namedprint  - Print list of named bootmem blocks
nfs         - boot image via network using NFS protocol
nm          - memory modify (constant address)
nm64        - memory modify (constant address)
octreginfo  - print register information
octwd       - Starts the OCTEON watchdog
pci         - list and access PCI Configuration Space
ping        - send ICMP ECHO_REQUEST to network host
printenv    - print environment variables
qlm         - Octeon QLM debug function (dangerous - remove from final product)
read64      - read 64 bit word from 64 bit address (deprecated)
read64b     - read 8 bit word from 64 bit address (deprecated)
read64l     - read 32 bit word from 64 bit address (deprecated)
read64s     - read 16 bit word from 64 bit address (deprecated)
reset       - Perform RESET of the CPU
run         - run commands in an environment variable
saveenv     - save environment variables to persistent storage
saves       - save S-Record file over serial line
setenv      - set environment variables
setexpr     - set environment variable as the result of eval expression
sf          - SPI flash sub-system
sha1sum     - compute SHA1 message digest
sleep       - delay execution for some time
source      - run script from memory
sspi        - SPI utility command
strings     - display strings
tftp        - alias for tftpboot command (deprecated)
tftpboot    - boot image via network using TFTP protocol
tftpput     - TFTP put command, for uploading files to a server
tftpsrv     - act as a TFTP server and boot the first received file
time        - run commands and summarize execution time
tlv_eeprom  - EEPROM data parsing
unlzma      - uncompress a lzma compressed memory region
unzip       - unzip a memory region
usb         - USB sub-system
usbboot     - boot from USB device
version     - print monitor, compiler and linker version
write64     - write 64 bit word to 64 bit address (deprecated)
write64b    - write 8 bit word to 64 bit address (deprecated)
write64l    - write 32 bit word to 64 bit address (deprecated)
write64s    - write 16 bit word to 64 bit address (deprecated)
Octeon cust_private_rhino_itus7x(ram)#